Amplifier Info

This is the highly anticipated post model of the Limited Edition 50 Watt amplifier. The Concorde incorporates the exact electronic features, components and circuit of the Limited Edition. Our newly fashioned head box cosmetically separates the Concorde from its predecessor. Traditional Trainwreck principles are followed in the design and construction. The Concorde is a single channel amp and does not have reverb, a master volume, an effects loop, foot switches, pull pots, transistors, chips or anything else that would degrade tone, harmonic complexity or touch sensitivity.

The head box is constructed with top quality Baltic Birch covered in vintage style black levant tolex. The front panel is made of solid Padauk hardwood, hand finished and centered by a 1/8th-inch stainless steel etched plaque which displays our traditional Komet "V". A simple, yet efficient Padauk back panel allows for optimum tube protection with plenty of ventilation to spare for the amplifier. Like all Komet amplifiers, our chassis is laser cut, solid 1/8" welded aircraft grade aluminum. It features completely sealed military-grade 2 Watt potentiometers and ceramic tube sockets with gold plated contacts. It is hand built with only the best sounding and most reliable parts, and as with all of our amplifiers, is completely hand wired.

This Trainwreck circuit, which includes Ken Fischer's specially designed power and output transformers, offers an exceptional sound. The Concorde is designed to operate exclusively on EL 34 power tubes. Ken has achieved the very best from this tube compliment without any compromises. The Concorde has more gain than Ken Fischer's other designs for Komet and incorporates a solid state rectifier. A new circuit in conjunction with new transformers and the careful selection of only the finest components allow the Concorde to offer benchmark EL 34 tone with rich complex harmonics, creamy rhythms and singing leads - all reinforced with a strong, bold, tight, low-end response. The Concorde follows the Komet / Trainwreck tradition of creating an amplifier with rich, balanced sound and unmatched musicality including superb touch sensitivity, note articulation, string to string separation and dynamic response.




- 50 / 60 Watts RMS (depending on power tubes).

- 2 - EL34 power tubes (operates also on 5881, 6L6, 6CA7, KT66, KT77, KT88, 6550 power tubes)

- 3 - 12AX7 pre amp tubes

- Fast / Gradual switch

- Military grade 2 Watt potentiometers: Volume, Treble, Middle, Bass, Presence, Hi Cut

- 4/8/16 - Ohm selection, two parallel outputs

- Adjustable bias pot with bias ports on back

- Custom designed transformers made in the U.S.A.

- Internally hand wired and meticulously assembled with the finest of components

- Silver tinned Teflon wire - hand wired onto glass epoxy tag board

- (audiophile grade) ceramic, gold plated tube socket pins on silver plated sockets made by Azuma

- All switches made by NKK

- 1/8th" laser cut & welded aircraft grade aluminum welded chassis made here in Louisiana

- Components assembled and mounted with stainless steel screws, bolts, washers and nuts.

- Head Format: 22.5" x 9" x 9" - made from Baltic birch ply - made in the U.S.A.

- Black or Silver aluminum control panels available

- Levant style tolex (custom order color options available)

- Weight: 38lbs.

- Completely built in Louisiana, U.S.A.

- 120V / 240V AC (internally hard wired)

Videos Page

Audio Page

  Purchase Info

Concorde Price: $3999.00

Dealers Page

Distribution Page